More about The Laundry

In my last post I asked if anyone had any ideas what the copper had been created from -

Well, I'm sorry but you were all wrong!   It was made from this, a gravy granules pot.

I'm sure there are loads more uses this size of pot can be put to (I just have to think of them).

The steps were a preformed set I already had in the stash and the gap was just filled in with some wood, shaped to fit and painted all a stoney grey colour.



I had an inspirational photo to work from

which gave me the shape of the opening and a little shelf affair was added to take the coals.   A couple of bars across the front, a bowl created in the top to take the water, a fitted lid and there you have it.

My washing machine is probably the grandest item in The Laundry.   It was purchased at a Miniatura Fair from Harlands of Hedon

It's a beautifully detailed item and has working bits on the lid and when the handle is turned, there's a paddle inside that rotates.

I really wanted an airer in my Laundry room and the only way I could do this without taking up much space was to place it against the back wall.    It's basically just a length of wood with a handle and wheels.   Attached to the back of the "door" and the wall are pieces of cocktail stick to take the laundry.   A few pieces are included for show.

Another item I'm particularly pleased with in my Laundry is the stove for heating the irons.  

Now.........can you guess what THIS was made from?

The Laundry

The work done on the Laundry took place some time ago and was the first room tackled inside the house.   The room is a pretty good size measuring 16" square x 8" high (40.6cms square x 20.3cms high) but because I will never do a house as big as this again I decided I wanted everything in it and so I chose to divide it into two spaces.   (As if I didn't have enough rooms in this house - I still want more!)   One side measures 6.5" wide (16.5cms) and the other - the Laundry - 9.5" wide (24.1cms).

Since that picture was taken, the dividing wall has been moved slightly to the left and is mdf and not foamboard.   The partition comes out from the back wall and ends up in line with the door to the left and the decision was made to stop the wall short rather than have two long skinny rooms.   These spaces could probably have been filled easily enough but this arrangement gives a better feeling of space.

The initial plan was to have a Gun Room to the left of the Laundry but that idea has since been replaced with a Butler's Pantry.  There may yet be one squeezed in elsewhere but for the moment I'm happy with this arrangement as quite a bit of time was spent jumping from one idea to the other before making the final decision although it would be a shame not to have one, wouldn't it?

Having decided on the width of each room, the spaces were then decorated - the Butler's Pantry with good old lining paper and emulsion and the Laundry with a brick finish paper.

The cylindrical item to the left hand side of the Laundry will eventually be the copper.   Can you guess what it was originally?

My "Get Up and Go" got up and went!

I've not blogged here for ages because as the title says "the get up and go" got up and went.  Where?   I've no idea but I think I'm back now and raring to go.   I couldn't even be bothered posting and blogging about the pictures and progress I had already made before starting this blog so there's still lots to see and tell and although I was keeping up to date with the blogs I follow, I'm afraid I haven't been posting there either so...sorry to all of you whom I regularly comment on, you're all doing great things and I'll get back to posting very soon.

This doesn't mean that I'd gone into hibernation but I don't think all this blessed rain has helped any.   Not one ray of sunshine up here for weeks.

Anyway, during this time No 2 son has set up home with his fiance and I now have a good space to store the minis.   NOT the room I'm after (that belongs to No 1 son!) but a step in the right direction nonetheless.   I've started boxing the bits in preparation for the BIG MOVE.    This, in turn, will give me back my Conservatory and Dining Room after 6/7 years.    Long overdue :-)

I've only one photo to show you and this is a wee item I spotted on Sunday at an Antique and Collectors' Fair.   It just so happens I have a birthday coming up soon and a very generous sister accompanied me!   You may recognise it as Queen Mary's Dolls House.   It's made, I think, from some fine bisque and quite fragile and once it's had a bit of a clean it will be given a special place in my temporary mini room - thanks Valerie!

Where are the Scottish Honours?

On Christmas Day 1950, four Scottish students took the Stone of Destiny from Westminster Abbey, London to Scotland.

The stone's custodian later left it on the altar of Arbroath Abbey, in the safekeeping of the Church of Scotland. Once the London police were informed of its whereabouts, the Stone was returned to Wesminster. Afterwards, rumours circulated that a copy had been made of the Stone, and that the returned Stone was not in fact the original.

So what happened to the original? There are those who believe that whoever holds the Honours of Scotland also keeps the Stone of Destiny, with Scotland's full regalia, ready to crown the last descendant of the Royal Scots.

The Scottish Crown jewels were until recently, held within the stronghold of Edinburgh Castle. However, it has recently come to light that the jewels may be fakes and the originals were stolen from the Castle during the last Jacobite Rebellion. There is much speculation that they are currently under guard in one of Scotland's great country houses.

Rumours are rife that the Honours are being held at one of the following Scottish estates: Hopetoun House, Falkland Palace, Linlithgow Palace or Netherton.

All owners of these great houses deny any knowledge of the whereabouts of the Honours, although it is rumoured that Netherton has a secured strong room. No one has had recent access to this place so who knows what secrets that great house may be harbouring?

* With thanks to my sister Valerie for the prose.

A welcome, a Basement and a sneaky peek!

First of all, a very warm welcome to all new followers.   I'm very pleased to have you here and hope you like what you see.

Well, that's it.    That's all there is to see of the basement.  It's finished with the exception of any additional "bits" I'm likely to find.   The bin needs some rubbish and I'll be on the lookout for any other items I think may be "basement worthy".

I was thinking, when taking the photos, it's a bit too tidy but I'm not good at messy so I'm happy to leave things as they are for the time being.

All I have to do now is show you the pictures - going from the left to right and one or two you've seen before.

Oops, I nearly forgot the housemartins!

and finally, a wee sneaky peek of what's coming next..............

The Laundry!

Bin there, done that!

After quite a prolonged search for a suitable dustbin to purchase it became clear that there wasn't anything out there that suited my purpose so in the end, I had to make one.

I came across an excellent article featuring a Winter Scene created by Robin Britton and Celia Thomas of Nostalgia in Miniatures Workshops. The article was featured over three months (January, February and March) in the Dolls House & Miniature Scene Magazine and the detailed instructions for the creation of the bin were published in the February issue.

First of all I had to cut a piece of corrugated card (the sort used for packaging books), dampen it and fix it round a suitable shape and leave to dry.

While that was happening I used the template provided to produce the lid.   This was then used to cut the required shapes onto white card.   (The top shape is actually round, it just wouldn't lie flat - that's what happens when you use greaseproof paper from a roll!)

I had to join the circle and once the glue for that had dried, the shaped piece was glued on top.

It then looked like this.   The next step was to snip into the lower layer and bend down to create the lid and add a thin strip of card round  the edge so that the lid fitted neatly over the bin.

When the card had dried, it was then removed from the form (dampening the card certainly made it hold it's shape very well) and a strip of paper was glued over the join and tucked down inside.

I then drew round the base of the bin and cut out the circle to create the bottom.   This was glued in place.

Little strips of card were cut to form the handle on the lid and one on either side.   It was then ready to paint.

I deviated a bit from the instructions at this point and used Steel coloured enamel paint (instead of silver) as I was after a "galvanised steel" look.

The bin featured in the article has a more rusted and grungy look to it.

My first coat was the steel paint followed (as instructed) by a mix of steel and black, this was put on then blotted off with scrunched up paper towel.   The next step of the instructions stated that I then had to add a little white paint to the mix and, using a thin stick, run the paint down the ridges.   This all worked absolutely fine but having seen the finish after one coat of paint, I let the whole thing dry and went back to the original finish.   I have a hard time dealing with "well used and grungy"!

I should really have gone on and added  some terracotta paint to give it that well used rusty look (as per the the article) but as I was happy with the finish I had and it fitted in well with what I had in my mind's eye, I left it alone.

I look care to paint the top inch of the inside of the bin because, in time, it's my intention to give the bin contents but at the moment I'm just pleased I managed to find one that did the job so well.

Thank you Robin and Celia for the very clear and detailed instructions.

 

The Privy

Do you ever have one of  those nights when you can't sleep and your head is birling with ideas for your latest project?   Well, I do too.

One night (2am to be precise) I had what I thought was a marvellous idea for Netherton.   I lay there and thought about it and thought about it and in the end, I just had to get up and nip downstairs to check and see if my idea was feasible and guess what?   Yes it was!

The first thing next day work was started on a Privy in the basement area under the pavement walkway.

The walls are made from foam board as is the door, which has been planked and straps placed across the inside.   The interior stonework has been left as it is but painted white.

The door had ventilation holes drilled and was then painted to match in with the Servant's Entrance.   (I can't help it - I was born colour co-ordinated!).

This is the view the scullery maid has when washing the dishes!

The "facilities" themselves are really basic and straightforward.   Some brick paper to the front of a wooden panel, a hole cut in a piece of balsa - cut to size and varnished.   The cistern I already had and that has been placed on a shelf using a piece of cornice as the support.

On the shelf to the inside right there is a spare roll of toilet paper and a candle holder.   There is also a toilet roll on it's holder fixed to the back of the door.

Another view for the scullery maid.

From above...

My little privy.